Software License Agreement

Micron Technology, Inc. Software License Agreement


PLEASE READ THIS LICENSE AGREEMENT (“AGREEMENT”) FROM MICRON TECHNOLOGY, INC. (“MTI”) CAREFULLY: BY INSTALLING, COPYING OR OTHERWISE USING THIS SOFTWARE AND ANY RELATED PRINTED MATERIALS (“SOFTWARE”), YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE.

LICENSE: MTI hereby grants to you the following rights: You may use and copy the Software and redistribute it to third parties subject to the terms of this Agreement. You must maintain all copyright notices on all copies of the Software. MTI may make changes to the Software at any time without notice to you. In addition MTI is under no obligation whatsoever to update, maintain, or provide new versions or other support for the Software.

OWNERSHIP OF MATERIALS: You acknowledge and agree that the Software is proprietary property of MTI and is protected by United States copyright law and international treaty provisions. Except as expressly provided herein, MTI does not grant any express or implied right to you under any patents, copyrights, trademarks, or trade secret information. You further acknowledge and agree that all right, title, and interest in and to the Software, including associated proprietary rights, are and shall remain with MTI. This Agreement does not convey to you an interest in or to the Software, but only a limited right to use, copy and redistribute the Software in accordance with the terms of this Agreement. The Software is licensed to you and not sold.

DISCLAIMER OF WARRANTY: The Software is provided “AS IS” without warranty of any kind. MTI EXPRESSLY DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI, ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Because some jurisdictions prohibit the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

TERMINATION OF THIS LICENSE: MTI may terminate this license at any time if you are in breach of any of the terms of this Agreement. Upon termination, you will immediately destroy all copies the Software.

GENERAL: This Agreement constitutes the entire agreement between MTI and you regarding the subject matter hereof and supersedes all previous oral or written communications between the parties. This Agreement shall be governed by the laws of the State of Idaho without regard to its conflict of laws rules.

CONTACT: If you have any questions about the terms of this Agreement, please contact MTI’s legal department at (208) 368-4500.

By clicking on the Accept button, you agree to the terms of the License Agreement. You must agree to the terms in order to download the software.

NDA Agreement

Micron Technology, Inc. NDA Agreement

To access these documents, you must first read and accept Micron’s electronic non-disclosure agreement. If the Recipient has a written confidentiality agreement with Micron Technology, Inc. you will need to click “Accept” at the bottom of this page, but the terms of the written confidentiality agreement will apply.

ON-LINE NONDISCLOSURE AGREEMENT THIS IS A LEGAL AGREEMENT BETWEEN YOU OR THE COMPANY YOU REPRESENT (EACH A “RECIPENT”) AND MICRON TECHNOLOGY, INC. (“MTI”) STATING THE TERMS AND CONDITIONS THAT GOVERN THE CONFIDENTIALITY OF INFORMATION POSTED TO OR MADE AVAILABLE THROUGH THE MICRON WEBSITE. PLEASE CAREFULLY READ THIS NONDISCLOSURE AGREEMENT (“AGREEMENT”) BEFORE CLICKING “ACCEPT” AT THE BOTTOM OF THE PAGE. BY CLICKING ON”ACCEPT”, RECIPIENT IS AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF RECIPIENT DOES NOT AGREE TO THE TERMS OF THIS AGREEMENT, PRESS “DECLINE” AND RECIPENT WILL BE UNABLE TO ACCESS CONFIDENTIAL INFORMATION.

1. Written Nondisclosure Agreement. If Recipient and MTI have entered into a written confidentiality agreement (“Confidentiality Agreement”) that is in effect as of the date Recipient enters into this Agreement and such Confidentiality Agreement already applies to and governs the Confidential Information (defined below), then the terms of such Confidentiality Agreement shall apply to and govern Recipient’s obligations concerning such Confidential Information and not the terms of this Agreement.

2. Confidential Information. “Confidential Information” means any information or data posted to or made available through MTI’s secure website that is
(i) marked or labeled as “Confidential” or “Proprietary” or with similar designation, or
(ii) of a nature that a reasonable person would know such information is confidential.

 

Confidential Information does not include that which:

(i) is proven by Recipient through competent evidence to rightfully have already been in Recipient’s possession at the time of disclosure without an obligation of confidentiality;
(ii) is or becomes available to the public through no fault or breach on the part of Recipient;
(iii) is independently developed by Recipient without use of or reference to the Confidential Information; or
(iv) is rightfully obtained from a third party who has the right to transfer or disclose it to Recipient without restriction. 

12. Injunctive Relief. Recipient acknowledges and agrees that disclosure of Confidential Information in violation of the terms of this Agreement will cause irreparable harm to MTI for which monetary damages would not be an adequate remedy. Therefore, Recipient agrees that, in addition to any other remedies available to MTI, in the event of any breach or threatened breach of this Agreement, MTI shall be entitled to injunctive relief and Recipient waives any requirement for the posting of a bond in connection therewith.

13. No Implied Waiver. MTI’s failure or delay in exercising any of its rights hereunder will not constitute a waiver of such rights unless expressly waived in writing.

14. General. This Agreement:
(i) may be amended or modified only by an express writing signed by Recipient and an authorized representative of MTI;
(ii) will not be construed as creating any joint venture, partnership or other form of business association between the parties hereto;
(iii) is not assignable or delegable in whole or in part by Recipient without the express written consent of MTI;
(iv) shall inure to the benefit of and be binding upon the parties, their successors, the assigns of MTI and the permitted assigns of Recipient; and
(v) is in the English language only, which language shall be controlling in all respects, and all versions of this Agreement in any other language shall not be binding on the parties hereto.

15. Authorized Signatory. The individual clicking on “Accept” is entering into this Agreement and accessing Confidential Information either
(1) as an individual, and hereby agrees that he or she shall be personally liable to MTI if Confidential Information is disclosed or used in a manner not authorized by this Agreement, or
(2) on behalf of an employer or other entity, and hereby represents and warrants that he or she has full legal authority to bind such employer or entity to this Agreement and that such employer or entity shall be legally bound by all of the terms and conditions of this Agreement as Recipient hereunder.

IF CONFIDENTIAL INFORMATION IS FOR AN EMPLOYER OR ENTITY, BUT YOU DO NOT HAVE THE LEGAL AUTHORITY TO SO BIND SUCH EMPLOYER OR ENTITY, THEN DO NOT ACCESS, VIEW, READ, OR DOWNLOAD IN ANY WAY CONFIDENTIAL INFORMATION, AND DO NOT CLICK ON “ACCEPT.”

In order to review documents, you must accept the NDA. If you do not accept these terms, select Cancel to exit this menu.

Secure document access request process

Thank you for your interest in Micron secure content. In order to get access to this content, we need two pieces of information from you.

First, a Document access request allows us to check whether your company's Non-disclosure agreement (NDA) covers secure content. If your company has a valid NDA on file, our system will check and advance you through the process.

Second, an End user certification (EUC) ensures that we comply with export controls. If your company has a valid EUC, our system will check and advance you through the process.

Secure document access request process FAQ

If you have submitted a Document access request and an End user certification today, the process can take up to 10 business days.

After you have submitted a document access request, you should have received a copy of your responses. Please send that information to our Web support team using the Contact us form. Our team will review your request and put you in contact with the correct teams to resolve the issues.

Login/Register

Welcome to Micron.com, please Log in or Register for an account to continue.

Export Compliance Certification (ECC)

Micron Technology Inc. ECC Agreement

To access this information, you must agree to comply with all applicable U.S. export control restrictions, including all laws, regulations, and requirements.  By clicking “I Agree” below, you agree to comply with those restrictions, including that:

  • You agree not to transfer or export the information:
    • To any non-U.S. person or location without obtaining all necessary approvals from the U.S. Government
    • To any restricted countries such as the Crimea Region (including the Donetsk People’s Republic (DNR) and Luhansk People’s Republic (LNR) regions), Russia, Belarus, Cuba, Iran, North Korea, and Syria or to any sanctioned persons prohibited from receiving U.S. items or services
  • You will refrain from using the information for activities related to the development, production, or support of advanced integrated circuits (ICs) at a semiconductor facility, or for the development, production, or support of supercomputers, in China or Hong Kong.
  • You are not accessing the information for non-U.S. military activities (including activities related to weapons of mass destruction) or for the benefit of non-U.S. military entities or end users.
デザインツール

Suggested Search

    メモリ

    DRAMモジュール

    マイクロンは、モジュール製造の全工程を自社で行います。すべてのDRAMを自社で設計、製造、テストした後、モジュールを組み立て、再度テストを実施します。このため、高性能スモールアウトライン（SO）DIMMから高密度レジスタードメモリまで、マイクロンの製品は、その品質と信頼性を誇ります。

    DRAMモジュールのメリット

    注目のリソース

    設計ツール

    マイクロンの製品とソリューションをお客様の求める設計に最適化するためのツールやリソースをワンストップで提供します。

    すべての設計ツールを表示
    Blue and purple technology circuit

    カスタマーサポート

    マイクロンに連絡する必要がある場合は、サポートチームにお問い合わせいただき、各地域の連絡先情報を入手してください。

    サポートへのお問い合わせ

    データシートを検索、フィルター、ダウンロードする

    製品の特性、仕様、機能などに関する詳細な情報を知ることができます。

    データシートを検索

    マイクロンのサンプルを注文する

    マイクロンのメモリサンプルの発注と注文の追跡をオンラインで行うことができます。

    サンプルの注文

    ダウンロードと技術資料

    お客様の革新的な設計、テスト、構築、最適化をお手伝いするリソースをご利用いただけます。

    ダウンロードと技術資料